Modern day paint booth manufacturers have a significant number of types of such booths. The reason for this is to cover the entire spectrum of customer requirements. You could want a booth to paint an automobile or an aircraft or a very tiny intricate part in large numbers. All of these different samples would need different types of booths. Because of this reason the various types of paint booths are: Automotive paint booth Truck spray booth and Industrial spray booths Truck and Industrial Spray Booths The truck spray booths are further categorized into the full; side and the semi-down draft varieties besides the reverse and front flow types. Similarly the industrial spray booths are sub-divided into the airplane booths and the production tunnels. Automotive Spray booths The automotive paint booth could be sub-divided into the premier variant, the insulated variant and the full, semi and side down draft variants besides the reverse and front flow types. The Premier Spray Booth This spray booth has white powder coated panels that are double walled and fully insulated. This results in considerable saving in energy, ease of maintenance and increased durability. The panels are punched with precision and made of heavy gauge galvanized steel for protection against corrosion and long life. The paint booth has uniform airflow due to the full ceiling air intake filters. The surplus spray is forced out of the vehicle by the central flow exhaust system. The direct-fired heat system scores by 20% in efficiency terms over the indirect fired heating system. Recirculation of preheated air from the baking cycle effects greater energy savings. Electronic monitoring of filters, energy saving motor drives and an auto shut down system all help in the further saving in running costs. The lights are strategically located and have access from the inside. This means that the exterior is flush and clean. The lighting is well focused in order to eliminate shadows. The lights have also been selected with the saving of energy costs in mind. The provision of tri-fold doors and a 2-meter pit under the central exhaust system further enhance the utilization of the automotive paint booth.
The Investment Of An Automotive Paint Booth
Quality Paint Booth – Solutions for All Requirement and Sizes
There are professionally managed manufacturers fabricating quality paint booths for all purposes and sizes. These booths are capable of painting metal, plastic and indeed any other surface with equal ease. The pre-engineered booths come in a variety of sizes meant for painting of smaller parts to those for painting automotive trucks, vans and cars. The accessories for paint booths include filters and exhaust fans. There are multi-stage powder coating booths which involve the use of multiple filters designed to trap the excess spray of powder thereby ensuring recirculation of clean air into your plant. In order to ensure a clean process each time, such powder coating booths use anti static technology for the walls. Using CNC machines, each panel and beam is pre-punched for the precision assembly of bolt and nut combination. This not only ensures an excellent finish but also that you can erect your booth quickly. These paint booths do not use obsolete I-beams but the J-beams, which are both lighter and stronger. The steel panels use steel of 18-gauge size and are galvanized in order to ensure freedom from corrosion. Use is made of stiffeners of steel to add to the robustness in the construction of the booth so that it can withstand not only the rough daily usage but also the weight of the air make-up system, which maybe roof-mounted in order to economize space. The options for automotive paint booths available range from the standard down draft, the semi down draft, the cross flow spray booth and the down draft side exhaust spray booth besides the special insulated variety. Similarly, in the range of paint booths for trucks there are the full down draft, semi down draft, side down draft varieties besides the front and reverse flow booths. All paint booths come with modern filters of excellent quality, an efficient energy management system, adequate lighting and a total control over particulate matter, humidity, pressure and temperature within the booth. The environmental specifications are rigidly observed in the discharge of exhaust and effluents.
The Advantages of Automotive Paint Protection Film
Paint Protection Film, or PPF (sometimes referred to as Clear Bra), is a thermoplastic urethane film which is most often applied to the forward or leading painted surfaces of a vehicle. Originally, this type of protective film was designed for military use on helicopter rotors to protect them from sand particles, and over the years it has expanded to general aviation, racing, and finally consumer vehicles and even electronic devices such as mobile phones. Paint Protection Film has been in use on privately owned vehicles for several years now, and with good reason.
From a maintenance standpoint, PPF is an excellent investment for any vehicle. The clear coated urethane film helps preserve the paint finish while protecting surfaces vulnerable to stone chips, bug damage, abrasion, and weathering. Not only will your vehicle’s paint be preserved from these types of damages, the film will allow your paint to age naturally, and will not yellow from prolonged sun exposure. Additionally, you can clean and maintain your vehicle the same as before. The nearly invisible film can be washed and waxed just like the rest of the painted surfaces to retain that high gloss shine you expect.
These protective films are typically applied to the impact zones on vehicles parts, or otherwise vulnerable areas such as hoods, fenders, side mirrors, bumpers, grills, rocker panels, headlights covers, floodlights, car door protection, luggage areas, rear bumper decks, roof and A-pillars. Most vendors guarantee their product not to haze, yellow or peel and offer a warranty of anywhere from two to five years when properly installed. The film contains ultra-violet stabilizers to prevent discoloration or degradation of the product itself while still allowing the sun’s rays to pass through to the paint so if you do decide to remove the film your vehicle will not be two-toned, or “sunburned”. Unlike leather car bras or plastic shields, these clear protective films are practically invisible and do not substantially affect the overall appearance of your vehicle.
All things considered, a transparent protective film is a far more appealing solution to many consumers. Leather bras and bug shields do what they’re supposed to, but many who enjoy the appearance of their vehicle find that these protective items are not at all appealing. Since paint protection film is virtually invisible, the look of the vehicle is not altered in any significant way, and it performs just as good, if not better, than the alternative. It’s like a second, tougher skin for your vehicle.
Most paint protection films, once applied, are 100% safe to remove from the vehicle at any time without damage to the paint and finish underneath. It is also worth noting that no debris can get underneath the protective coat, since it adheres directly to the paint. It can be applied to any painted surface on the vehicle, and even some areas without paint, such as headlight and tail light covers. The value of the film is clear, and it’s actually cheaper in many cases to apply a protective film coat than to repaint all or a portion of your vehicle later on once it has been damaged and scratched.